Polyjuice Potion Jelly Mold (non-alcoholic)

Polyjuice Potion Gelatin - set a cutesy little mold, garnished with smiling gummy worms . . .

Here's a quick remix of our old pal, Polyjuice Potion Jelly Shot.  And this one's non-alcoholic, for the kiddlos.  Looking for something more, well, BOOZETASTIC?  Don't fuss - just click here for the alcoholic version!


Massive spooky XOXOX's to you all!  M.

Polyjuice Potion Jelly Shots

Ginger Ale mixture
1 cup ginger ale
1 envelope plain gelatin

Pineapple mixture
1 cup canned pineapple juice (fresh won't work - the enzymes in fresh pineapple interfere with the gelatin)
1 envelope plain gelatin

Lime mixture
1/2 cup water
1 envelope plain gelatin
1/2 cup lime sherbet, melted

First, prep the mold (I used a 3-cup volume mini bundt pan) by lightly spraying with cooking spray.  Then wipe the mold cavities out with a clean paper towel. This method will leave just the slightest residue, which will help unmold the gelatin without affecting the taste or appearance.  


Prepare the three gelatin mixes as follows:

• Ginger Ale: Pour the ginger ale in a medium saucepan.  Sprinkle with the gelatin and allow to soak for a minute or two.  Heat over low heat, stirring constantly, until the gelatin is fully dissolved (about 5 minutes).  Remove from heat.  
• Pineapple: Pour the pineapple juice in a medium saucepan.  Sprinkle with the gelatin and allow to soak for a minute or two.  Heat over low heat, stirring constantly, until the gelatin is fully dissolved (about 5 minutes).  Remove from heat.  
• Lime: Pour the water in a medium saucepan.  Sprinkle with the gelatin and allow to soak for a minute or two.  Heat over low heat, stirring constantly, until the gelatin is fully dissolved (about 5 minutes).  Remove from heat.  Stir in the melted sherbet.

Pour each mixture into a separate bowl and refrigerate until partially set.  (Just starting to change from liquid to solid - about 20 to 25 minutes.)

Give each mixture a quick stir.  It should be a thick, but still liquid.  Clumpy is fine for this method!! Drop alternating spoonfuls of the three mixtures into the pan, until all the gelatin has been transferred.  Refrigerate until fully set (at least 6 hours or overnight - extra time is needed for the gelatins to bond).



To unmold, fill a large container or sink with warm water (not too hot!).  With clean fingers, loosen the gelatin around the edges of the pan/mold.  Next, dip the mold almost to the edge into the warm water for just a few seconds (10 seconds is usually a good start for larger molds, and 5 for individual). Dry the bottom of the mold with a towel and check the edges to ensure they have loosened up.  (If not, repeat the dip for just a few seconds.) Place your serving plate on top of the mold and invert.   

More »

"Polyjuice Potion" Jelly Shots

Polyjuice Potion Jelly Shots are creepy, spooky Potter-rific fun . . .

Another Potter-themed jelly shot for you!  These slightly creepy gelatin extravaganzas are made with pineapple juice, pineapple vodka, ginger ale and lime sherbet.
(To make for the kids, just omit the vodka and replace with additional soda or juice.)  Partially setting the gelatin mixtures partially set before adding to the pan provides a ghastly bubbly-potion effect.

Happy Pottering!

XO Michelle

Polyjuice Potion Jelly Shots

Ginger Ale mixture
1/2 cup ginger ale
1 envelope plain gelatin
1/2 cup ginger (or pineapple) vodka

Pineapple mixture
1/2 cup canned pineapple juice (fresh won't work - the enzymes in fresh pineapple interfere with the gelatin)
1 envelope plain gelatin
1/2 cup pineapple vodka

Lime mixture
1/2 cup water
1 envelope plain gelatin
1/2 cup lime sherbet, melted

Prepare the three gelatin mixes as follows:

• Ginger Ale: Pour the ginger ale in a medium saucepan.  Sprinkle with the gelatin and allow to soak for a minute or two.  Heat over low heat, stirring constantly, until the gelatin is fully dissolved (about 5 minutes).  Remove from heat.  Stir in the vodka.  
• Pineapple: Pour the pineapple juice in a medium saucepan.  Sprinkle with the gelatin and allow to soak for a minute or two.  Heat over low heat, stirring constantly, until the gelatin is fully dissolved (about 5 minutes).  Remove from heat.  Stir in the vodka.  
• Lime: Pour the water in a medium saucepan.  Sprinkle with the gelatin and allow to soak for a minute or two.  Heat over low heat, stirring constantly, until the gelatin is fully dissolved (about 5 minutes).  Remove from heat.  Stir in the melted sherbet.

Pour each mixture into a separate bowl and refrigerate until partially set.  (Just starting to change from liquid to solid - about 20 to 25 minutes.)

Prepare a standard 1lb loaf pan about 8" x 5", glass or non-reactive metal) by spraying with a little cooking spray and then wiping out with a paper towel.

Give each mixture a quick stir.  Drop alternating spoonfuls of the three mixtures into the pan, until all the gelatin has been transferred.  Refrigerate until fully set (at least 6 hours or overnight - extra time is needed for the gelatins to bond)

To serve, cut into rectangles.  Makes about 18 jelly shots.

More »

"Butterbeer" Jelly Shots

Potter-rific Butterbeer Jelly Shots on Wands! Alert Hogwarts!

Butterbeer Jelly Shot anyone? Yeah, I thought so ... aren't they cute?

Important serving tip - the sugar melts on these wicked quick. So either dip immediately before serving, or provide a tiny cauldron of color sugar crystals for dipping.

Also, to make these kid-friendly, just add extra creme soda and a little bit of caramel sauce in place of the hootch (a tablespoon or two, to taste - you don't want things to get sticky).

XOXOX M.

Butterbeer Jelly Shots

Ingredients:

• 1 cup creme soda
• 2 envelopes plain gelatin
• 1/3 cup vanilla vodka
• 2/3 cup butterscotch schnapps
• colored large crystal sugar, for garnish, if desired
• wooden coffee stirrers (the stems)

Instructions:

Pour soda in a medium saucepan and sprinkle with gelatin. Allow to soak for a minute or two.Heat over low heat, stirring constantly, until the gelatin is dissolved (about 5 minutes). Remove from heat.

Stir in the vodka and schnapps. Pour into standard loaf pan (non-reactive metal or glass, approx. 9" x 5"). 

Refrigerate until fully set (about 3 hours).

To serve, cut into desired shapes.

Immediately before serving, dip in colored crystal sugar, for garnish, if desired.

More »

"Chocolate Frog" Jelly Shots

"Chocolate Frog" Jelly Shots, preparing to hop off the tray. . . 

Just a tiny bit of Potter-inspired jelly shotting for you today.  The recipe is a variant of the Bushwacker . . . very chocolatey though and missing the coconut.  (Link for the delightfully creepy frog molds . . . )

For more Potter-rific fun (and you know you want it) see:

Butterbeer Jelly Shots

(AND, depending on how R&D goes today, it is possible I may have one more Potter-esque jelly shot trick up my sleeve for you!)

XO, Michelle

Chocolate Frog Jelly Shots

Ingredients:

• 1/2 cup water
• 2 envelopes Knox gelatin
• 3/8 cup vanilla ice cream, melted
• 1/2 cup chocolate liqueur
• 1/4 cup Bailey’s
• 1/4 cup vodka
• 1/8 cup amaretto

Directions: 

Prepare the molds with a light application of cooking spray.  Wipe the cavities clean with a paper towel.  This will leave a very slight residue which will aid in unmolding without affecting taste or appearance.  

Pour water in saucepan, sprinkle with gelatin.  Allow gelatin to soak for a few minutes.  Heat over very low heat until gelatin is dissolved, stirring constantly (approximately 5 minutes).  Add the melted ice cream.  Once combined, stir in vodka and the liqueurs.

Pour mixture into molds (or standard glass or non-reactive metal 1 lb loaf pan approximately 8” x 4” will work!).  Refrigerate until fully set (several hours or overnight).

To unmold, fill a larger container or clean sink with warm water (not too hot!).  With clean fingers, loosen the gelatin around the edges of the mold cavities.  Next, dip the bottom of the mold into the warm water for just a few seconds (10 seconds worked for me). Dry the bottom of the mold with a towel and check the edges to see if they are loose, if not, repeat the dip for just a few more seconds. Place a nonstick cookie sheet on top of the mold and invert.  The gelatin frogs should drop right out.  Return the “frogs” to refrigerator until immediately before serving.  

More »